{"id":470,"date":"2022-01-26T12:57:58","date_gmt":"2022-01-26T12:57:58","guid":{"rendered":"https:\/\/blog.productcluster.com\/?p=246"},"modified":"2022-01-26T19:35:36","modified_gmt":"2022-01-26T19:35:36","slug":"building_blocks_around_railway","status":"publish","type":"post","link":"http:\/\/blog.productcluster.com\/de\/blog\/2022\/01\/26\/klemmbausteine_ums_bahngleis\/","title":{"rendered":"Klemmbausteine ums Bahngleis"},"content":{"rendered":"

Erstes und neuestes Gleissystem <\/a><\/u><\/span><\/p>\n

Nachdem ich mit einer Einf\u00fchrung in die Klemmbausteine<\/a><\/u>begonnen habe, gibt es hier einige tiefere Einblicke in eine Unterkategorie, die Z\u00fcge. \u00dcbrigens, es gibt auch einen Beitrag \u00fcber ein Zugmodell, den BR 650 Dieseltriebwagen<\/a><\/u>, too. But let’s begin with some facts. A manufacturer of building blocks dominating the market for a long time introduced a railroad system in 1966, unfortunately a stepmotherly segment. Since ever, the system consisted of a single circle radius, straight rail pieces and a switch, fortunately matching the existing track curve with its counter switch, thus the mirrored switch. It is then also called a left or right switch. That\u2019s it in terms of tracks.<\/span><\/p>\n

Dann gab es noch \u00fcber die Geschichte hinweg verschiedene Systeme der Elektrik. Angefangen mit 12V Technik und Schienen mit zwei Mittelleitern zwischen den Gleisen, so war der Anfang. Es hatte Vorteile und Nachteile.<\/span><\/p>\n

<\/p>\n

The system was followed by current-carrying rails, i.e. one connected to the positive pole, one to the negative pole. The voltage was then simply tapped there. Nice, because it was closer to the original than the additional inner conductor rails. Negative, this applies to both track systems, because when you build a terminal loop (i.e. a circle that leads into one entrance and exit), you cause a short circuit in the tracks if you don’t insulate them. Even if they are only insulated, the vehicle would stop there because the voltage has reversed polarity to the direction of motion, so the motor then backs up or simply then stops on the insulation. This can be solved by track areas, which are then reversed in polarity accordingly, or one builds no terminal loops, as it was normal in former times at the end of a streetcar line, because one simply had not built two driver’s cabs into the streetcar. Simple way out: stub track with buffer stop and a track change for the opposite direction. <\/span><\/p>\n

Continuing with the building block tracks, then they went from 12V to 9V, which made it possible to use battery technology. This also eliminated all current-carrying rails, the entire track could be made of inexpensive plastic. The control then took place with an infrared interface, which works quite well in the apartment and outside the tunnels. Tunnels are bad anyway, then the train is no longer in the field of vision… Currently, the train is operated with Bluetooth, i.e. from a cell phone app, so the kids have enough arguments to occupy themselves more with the cell phone. Some manufacturer offer remote controls. But also this has advantages, that more than one person can play on a course at the same time and interactively. A place for the battery must then also be found, so is the control module and since the passenger trains are also equipped with interiors, the block is occasionally disturbing. <\/span><\/p>\n

\"Beleuchtetes<\/p>\n

Beleuchtetes LEGO Creator 10277 Schweizer Krokodil<\/span><\/p>\n

<\/p>\n

One existing constant is the track gauge. With five studs spacing these tracks are constructed, so a 40 mm rail to rail pitch. This results in a track gauge of 37.5 mm. The real of the major railroads, USA and Europe occupy about 40% of the world’s rail network, use the “standard gauge” 1435 mm. As interesting for models are then still the countries of the former Soviet states to mention, which use a wider track, but also “only” around 85 mm, which is in the context of this topic rather minor. Some of you will now say, but I was driving on the famous this-and-that line after all. It must be admitted that smaller countries very often import train material, so the “upper part” is identical to others. The narrow gauge is to be omitted from this post once completely. This then results in a fixed scale of 1:38.267. If we take another look at the original, we can roughly say that a standardized passenger car in Europe is about 3 m wide and 4 m high, these are the UIC-X. Twin-deck cars, modern cargo cars, still take a special position in the dimensions. This would result in a stud width of 10 studs. An express train car would have a height of 10.8 unit bricks. It is to be anticipated, nobody produces this so far, but it is the model fidelity of the front view. As frequently implemented in modeling, especially the long wagons are shortened. Who has at home also the possibility to reproduce a 200 m radius to scale. M\u00e4rklin got away with shortening the cars by 20 % for a long time, which is a sensible compromise on compact and narrow layouts. So it is then also with the rolling stock of the building blocks, length reductions, so that the optics is not completely lost. <\/span><\/p>\n

What is available on the market… The visually valuable models of the Lego company, whose target group is the older ones, use a stud width of seven for the detailed Swiss crocodile, 6 for the rather boxy Santa Fe diesel locomotive and 8 for the Disney train. So it’s all there, but you still want it to fit on the table, the length of the Santa Fe is about impressive 45 m. <\/span><\/p>\n

Hier eine Tabelle der am Markt verf\u00fcgbaren Klemmbausteinz\u00fcge, absichtlich werden keine Hersteller genannt. <\/span><\/p>\n

\"Gr\u00f6\u00dfenverh\u00e4ltnisse<\/p>\n

Zu finden sind in den ersten Zeilen der Tabelle die schon bekannten und erw\u00e4hnten Gr\u00f6\u00dfen und Beziehungen. Die Originale sind au\u00dfer farblicher Hinterlegung in der Zeilen dann noch in den Dimensionen von Millimetern aufgef\u00fchrt, bei den Modellen die Aufl\u00f6sung in Einheitssteinen (Noppen und Bausteinh\u00f6he, also 8 mm und 9,6 mm). <\/span><\/p>\n

Die Spalte Ratio(H\/W) besch\u00e4ftigt sich mit dem Verh\u00e4ltnis von Weite zur H\u00f6he. Der Mittelwert liegt bei den Originalen etwa bei 1:1,34, die Werte der verschiedenen Fahrzeuge liegen eng beieinander. Es gibt einen Hersteller, zugegeben, es liegt derzeit nur ein vergleichbares europ\u00e4isches Modell vor, da weicht das Modell nur 4,6 % ab. Aus eigener Anschauung kann ich feststellen, dass das Modell das Original sehr gut wiedergibt. In einem YouTube Video erkannte ich die V200.1, was bei der DB der BR221 entspricht. Das Video zeigt ganz eindeutig, dass das Modell viel zu hoch geraten ist, die Tabelle best\u00e4tigt, \u00fcber 20 % zu hoch, gleiches gilt f\u00fcr den VT11.6 (BR601\/BR602). Der \u201cRheingold\u201d Wagon ist mit 17 % ebenfalls zu hoch geraten. Die V100 gibt es in zwei verschiedenen Weiten, 6 Noppen und 8 Noppen, man kann gut erkennen, dass hier die 7 Noppen die richtige Wahl gewesen w\u00e4re, bei gleicher Modellh\u00f6he. <\/span><\/p>\n

Das erkl\u00e4rt dann den Fall, warum einige der Bauer die Modelle in der Weite m\u00fchsam anpassen. M\u00fchsam, weil manche Grundplatten extra f\u00fcr das Produkt in der angebotenen Weite produziert werden. So sind auch Z\u00fcge mit unterschiedlichen Weiten schlecht kombinierbar, da die Ansicht doch leidet. Eine Harmonisierung w\u00e4re hier von Vorteil, das haben die hart konkurrierenden Anbieter von Modelleisenbahnen schon sehr fr\u00fch geschafft. <\/span><\/p>\n

Es bleibt spannend. Wie sind Eure Meinungen zu diesen verschiedenen Modellen? Hinterlasst gerne einen Kommentar dazu.<\/h6>\n<\/span>","protected":false},"excerpt":{"rendered":"

First and last railway system After starting an introduction of building blocks, here are some deeper views into a subcategory, the trains. By the way, there is a post about a train model, the BR 650 diesel powered railcar, too. But let’s begin with some facts. A manufacturer of building blocks dominating the market for […]<\/p>\n","protected":false},"author":2,"featured_media":472,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"nf_dc_page":"","om_disable_all_campaigns":false,"pagelayer_contact_templates":[],"_pagelayer_content":"","footnotes":""},"categories":[95,17],"tags":[97,87,96,111,110,94,89,109,112,30],"class_list":["post-470","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-bricks","category-tips","tag-building-blocks","tag-construction-blocks","tag-history","tag-model-railroad","tag-model-railway","tag-noppensteine","tag-page","tag-railway","tag-scalled-model","tag-toy"],"acf":[],"_links":{"self":[{"href":"http:\/\/blog.productcluster.com\/de\/wp-json\/wp\/v2\/posts\/470","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/blog.productcluster.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/blog.productcluster.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/blog.productcluster.com\/de\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"http:\/\/blog.productcluster.com\/de\/wp-json\/wp\/v2\/comments?post=470"}],"version-history":[{"count":6,"href":"http:\/\/blog.productcluster.com\/de\/wp-json\/wp\/v2\/posts\/470\/revisions"}],"predecessor-version":[{"id":480,"href":"http:\/\/blog.productcluster.com\/de\/wp-json\/wp\/v2\/posts\/470\/revisions\/480"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/blog.productcluster.com\/de\/wp-json\/wp\/v2\/media\/472"}],"wp:attachment":[{"href":"http:\/\/blog.productcluster.com\/de\/wp-json\/wp\/v2\/media?parent=470"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/blog.productcluster.com\/de\/wp-json\/wp\/v2\/categories?post=470"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/blog.productcluster.com\/de\/wp-json\/wp\/v2\/tags?post=470"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}